TYRE SHIELD BOTTLE 1L

Please note: Product photos are for illustration purposes only and the actual product may differ from that shown.

PTY7798

TYRE SHIELD BOTTLE 1L

Brand: GA SPARES - GA

Please login to purchase

Extended Description

  • Tyre Shield 1 Litre Bottle.
  • Seals holes in both tube and tubeless tyres up to 6mm in diameter in the tread area
  • of the tyre and 3mm in tube tyres as the vehicle is being driven.
  • Prevents rust, heat build up, and seals pourous leaks and maintains tyre pressure.
  • Does Not affect tyres or rims.
  • Helps to extend tyre life by the combination of maintaining correct balance and the
  • prevention of heat build up. (Causes no damage to steel, aluminium or tyre rubber.
  • Balances tyres in motion. Seals all pourous leaks and bead leaks.)
  • Australian Made.
  • Puncture prevention treatment added to tyres and tubes prior to punctures. This product is ideal for use on ride on lawnmowers, quad bikes, motorbikes, cars, four wheel drives, trailers etc.
  • Directions For Use:-
  • Balance tyres before applying. Tyres must be devoid of all matter i.e. other
  • sealants, chalk, water etc, before application. Do not use this product where rims
  • have been modified with brass or copper.
  • 1. Shake bottle. Cut 3 mm down from tip of nozzle cap.
  • 2. DO NOT position valve below the 9 or 3 o’clock mark.
  • 3. Remove valve core and deflate tyre.
  • 4. Push plastic tube over bottle nozzle and the other end of plastic tube over tyre
  • valve stem.
  • 5. Squeeze in recommended amount: 60 ml per Ride-on tyre; 60 ml per Push Bike tyre;
  • 60 ml per Golf Buggy tyre; 100 ml per standard Car tyre; 200 ml per 4WD & A.T.V
  • tyre; 200 ml per Truck Tyres 1000 x 20; 500 ml per Super Single Truck tyre & Desert
  • Dual 4WD type tyre; 50 ml per front wheel of Motor Bike tyre; 100 ml per back wheel
  • of Motor Bike tyre; 60 ml per front tyre of AG bike; 100 ml per back wheel of AG
  • bike.
  • 6. Squirt compressor air into valve to clear any residue product before
  • re-inserting valve core.
  • 7. Re-inflate tyre and ensure that the tyre is roaded on completion of TYRE SHEILD
  • application.
  • TYRES WHICH ARE USED IN HIGH RISK (3-4 PUNCTURES PER DAY) AREAS REQUIRE DOUBLE THE
  • ABOVE AMOUNT.
  • On purchase the consumer will determine the suitability of the product for their
  • intended use. The seller and manufacturer will not be liable for any loss, damage
  • or injury arising direct or consequential, from use or misuse of this product.
  • Retailer and manufacturer will replace only quantity of the product which proves to
  • be defective. The above shall not be altered except by an agreement signed by the
  • manufacturer.
  • 4
  • 1
  • Tyre Shield,
  • Puncture Preventative Treatment,

Copyright © Roy Gripske & Sons Pty. Ltd. 2013~2022. All Rights Reserved.